PEEK-CF10 | Excellent High-Performance Reinforced Filament
AUD$1,234.00
- Weight: 1KG
- 10% Carbon Fiber Reinforced PEEK 3D Filament.
- PEEK-CF10 is one of the premier polymers in FFF/FDM 3D Printing.
- Made using 10% chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.
- PEEK is one of the highest-performance thermoplastics ever invented.
10% Carbon Fiber Reinforced PEEK-CF10 3D Filament
PEEK-CF10 is one of the premier polymers in FFF/FDM 3D Printing. Made using 10% chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.
PEEK is one of the highest-performance thermoplastics ever invented. It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components. Industries such as Auto, Aerospace, Defense, Semiconductor, and Oil/Gas depend on PEEK for applications where failure is not an option.
PEEK-CF10 Properties Include
• Superior Mechanical Properties, especially at elevated temperatures
• Excellent Chemical Resistance
• Low Coefficient of Linear Thermal Expansion (CTE)
• Near Zero Moisture Absorption
• Low smoke and toxic gas emissions
PEEK has excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).
PEEK-CF10 Thermal Properties:
• Heat Deflection Temperature (HDT) 280°C (when crystalized)
• Glass Transition Temperature (Tg) 143°C
• Melt Temperature (Tm) 343°C
Printing with PEEK-CF10
• Extruder Temps: 395 – 410°C
• Bed Temps: 125 – 140°C
• Bed Prep: Rough Borosilicate Glass with PVP gluestick, or High temp carbon fiber sheet plus PVP glue stick, we also recommend the Vision Miner Nano Polymer
• Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our Carbide nozzles
• Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.25mm with carbon fiber grades. Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
• Please note –PEEK-CF10 has a tendency to stick to metal (PEEK loves metal). Please make sure to purge out your extruder before it cools down or you run the risk of permanent clogs.
• Drying Instructions: Please dry @110-120°C for 12-24 hours, for the first dry its recommended to dry for at least 24 hours before using, the drying time can be lowered using a vacuum oven and also storing the filament in a degassing chamber when not in use.
• Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C] See More
| Category | Details |
| Filament Name | PEEK-CF10 |
| Type | Reinforced Filament with 10% Chopped Carbon Fiber |
| Applications | Seals, gears, bushings, bearings, pump & compressor components |
| Industries: Automotive, Aerospace, Defense, Semiconductor, Oil & Gas | |
| Key Benefits | – Superior mechanical properties at elevated temperatures |
| · Excellent chemical resistance | |
| · Low coefficient of thermal expansion (CTE) | |
| · Near-zero moisture absorption | |
| · Low smoke and toxic gas emissions | |
| · Hydrolysis resistance in boiling water and superheated steam (>250°C/482°F) | |
| Technical Specifications | 1. Diameter: 1.75mm ± 0.05mm |
| 2. Nozzle Temperature: 395–410°C | |
| 3. Bed Temperature: 125–140°C | |
| Bed Preparation Options | · Rough borosilicate glass with PVP glue stick |
| · High-temp carbon fiber sheet plus PVP glue stick | |
| · Vision Miner Nano Polymer adhesive | |
| Drying Instructions | 1. Dry at 110–120°C for 12–24 hours (24 hours recommended for initial use) |
| 2. Use a vacuum oven to reduce drying time | |
| 3. Store in a degassing chamber when not in use | |
| Optional Chamber Temp | 70–140°C (recommended up to 140°C for better results) |
| Nozzle Specifications | Use 0.4mm or larger carbide nozzles |
| Layer Height | Ideal: 60% of nozzle diameter (avoid layers below 0.25mm to prevent jams and poor
feeding) |
| Special Notes | PEEK-CF10 sticks to metal; ensure purging the extruder before cooling to avoid permanent
clogs |
| Shelf Life | Usable up to 12 months from delivery |
| Contact Information | Phone: +61447809195 Email: innovate3dglobal@gmail.com Website: https://innovate3dglobal.com/ |
| Address | Innovate3Dglobal, Ashley Lane, 19/1A, Westmead, New South Wales 2145, Australia |
| Disclaimer | The information is provided to the best knowledge of the manufacturer and is for reference purposes only. |
| Weight | 1 kg |
|---|---|
| Weight | 1 KG |
Related products
-
Sale!
-
Sale!
-
Sale!
Reviews
There are no reviews yet.