PA6-CF20 | Exclusive High-Performance 3D Reinforced Filaments

PA6-CF20 filament is made using a PA6 copolymer which is then reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high stiffness, improved chemical and thermal resistance, excellent surface quality, and ease of printing.

The excellent rigidity of this material gives customers the properties they need to make their 3D-printed parts with less material and save weight without sacrificing stiffness.

Benefits of PA6-CF20

 

• Easy printability
• High tensile strength and rigidity
• wear and Abrasion resistance
• Improved chemical resistance over common materials like PLA and ABS
• High thermal properties

Filament Specifications:

1.75mm  +/- 0.05mm in diameter

 

Recommended Print Settings:

• Extruder: 245-270°C
• Bed Temp: 80-100°C
• Heated Chamber: A heated chamber between 30-80°C allows for superior layer bonding and mechanical properties however this is not a strict requirement
• Bed Prep: Rough Borosilicate Glass with PVP gluestick, or high temp carbon fiber sheet plus PVP glue stick, we also recommend the Vision Miner Nano Polymer
• Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our Carbide nozzles
• Other: Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
• Drying Instructions: 90°C for 4-6 hours. See More

Here’s the table for PA6-CF20 filament:

Category	Details
Description	PA6 CF20 filament is made using a PA6 copolymer reinforced with high-modulus carbon fiber. Ideal for creating structural components with high stiffness, chemical and thermal resistance, excellent surface quality, and easy printability..
Benefits	·         Easy printability ·         High tensile strength and rigidity ·         Wear and abrasion resistance ·         Improved chemical resistance over PLA and ABS ·         High thermal properties
Filament Specifications	Diameter: 1.75mm +/- 0.05mm
Recommended Print Settings	1.      Extruder Temperature: 245-270°C 2.      Bed Temperature: 80-100°C 3.      Heated Chamber: 30-80°C (optional, for superior bonding and properties) 4.      Bed Preparation: Rough Borosilicate Glass or carbon fiber sheet with PVP gluestick 5.      Nozzle: 0.4mm or larger, preferably carbide 6.      Layer Height: 60% of nozzle diameter (minimum 0.25mm)
Drying Instructions	Dry at 90°C for 4-6 hours before use.
Manufacturer	Innovate3Dglobal Pty Ltd Address- Ashley Lane, 19/1A, Westmead, New South Wales 2145, Australia
Other Services Offered	Prototyping Services, Design for Additive Manufacturing, Filament Extrusion, 3D Printing Services

FAQ for PA6-CF20 Filament

1. What is PA6 CF20 filament made of?
   PA6 CF20 filament is made from a PA6 copolymer that is reinforced with high-modulus carbon fiber, offering superior stiffness, chemical and thermal resistance, and excellent surface quality.
2. What are the key benefits of using PA6 CF20?

1. Easy printability
2. High tensile strength and rigidity
3. Excellent wear and abrasion resistance
4. Improved chemical resistance compared to PLA and ABS
5. Superior thermal properties

3. What are the recommended print settings for PA6-CF20?

1. Extruder Temperature: 245-270°C
2. Bed Temperature: 80-100°C
3. Heated Chamber: 30-80°C (optional for superior bonding and mechanical properties)
4. Bed Preparation: Use rough borosilicate glass with PVP gluestick or a high-temp carbon fiber sheet with PVP glue. Vision Miner Nano Polymer adhesive is also recommended.
5. Nozzle: Use a 0.4mm or larger nozzle, preferably carbide, to handle the mildly abrasive carbon fiber.
6. Layer Height: 60% of nozzle diameter (minimum 0.25mm).

 

4. What drying instructions should be followed for PA6-CF20?
   Dry the filament at 90°C for 4-6 hours before use to remove moisture and ensure optimal print quality.

 

5. Does PA6-CF20 require a heated chamber for printing?
   While not strictly required, using a heated chamber (30-80°C) can improve layer bonding and mechanical properties.

 

6. What makes PA6-CF20 suitable for structural components?
   The combination of PA6 copolymer and high-modulus carbon fiber provides high stiffness, reduced material use for weight-saving, and excellent mechanical and thermal properties, making it ideal for structural applications..

 

7. What precautions should I take when printing with PA6-CF20?

1. Use a carbide nozzle to prevent wear from carbon fiber abrasiveness.
2. Avoid layer heights below 0.25mm to prevent back pressure and feeding issues.
3. Store the filament in a dry environment when not in use.

 

8. What applications is PA6 CF20 suitable for?
   PA6 CF20 is ideal for creating lightweight structural components, prototypes, and end-use parts that require high strength, durability, and thermal resistance.

 

9. How does PA6 CF20 compare to PLA or ABS?
   PA6 CF20 offers higher tensile strength, rigidity, chemical resistance, and thermal stability compared to PLA or ABS, making it a more robust choice for demanding applications.

 

10. Who manufactures PA6 CF20?
    PA6 CF20 is produced by Innovate3Dglobal Pty Ltd, a 3D filaments manufacturing company based in Westmead, New South Wales, Australia.